Need help?Do you have a question about the Lab.gruppen fP Series FP 3400 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Total Harmonic Distortion (THD) | < 0.1% |
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity | 1.4 V |
| Signal-to-Noise Ratio | > 100 dB |
| Voltage Gain | 32 dB |
| Power Output (2 Ohms) | 1700 W per channel |
| Input Impedance | 20 kOhm |
| Cooling | Forced air |
| Dimensions | 483 x 88 mm |
| Operating Voltage | 100-240V, 50/60Hz |
| Power Output (8 Ohms) | 2 x 1700 W |
Explains graphical symbols and provides immediate safety warnings for users.
Comprehensive safety guidelines covering installation, usage, and maintenance to prevent hazards.
Outlines user obligations, speaker damage risks, output hazards, and radio interference.
Covers MLS switch functionality, its technical background, and solutions for impedance matching.
Details how clip limiting and thermal protection safeguard the amplifier and speakers.
Explains various protection mechanisms against VHF signals, short circuits, and AC voltage fluctuations.
To Next Page
