Need help?Do you have a question about the Lab.gruppen fP Series FP 2400Q and is the answer not in the manual?
General| Brand | Lab.gruppen |
|---|---|
| Model | fP Series FP 2400Q |
| Category | Amplifier |
| Language | English |
Explains warning symbols used in the manual for user safety.
Key warnings to avoid hazards like fire, shock, and moisture exposure.
Comprehensive safety guidelines for amplifier operation and handling.
Details how the amplifier's power can damage loudspeakers if not managed.
Warns of hazardous output voltages and the risk of electric shock.
Discusses EMC compliance and potential radio interference issues.
Guide to unpacking the amplifier and checking for any shipping damage.
Description of front panel controls, indicators, and features.
Explains the clip indicator's function and its different states.
Details the fan grill filters and their maintenance.
Identifies the power switch for turning the unit on or off.
Details the Neutrik Speakon connector for speaker connections.
Explains the MLS switch for selecting maximum output power.
Describes the switch to turn the clip limiter on or off.
Details the balanced XLR input connectors.
Explains the link switch for driving multiple channels from one input.
Describes the switch for linking channels and polarity reversal.
Refers to the AC power connection.
States the fixed gain of the amplifier.
Defines sensitivity and provides voltage/dBu requirements for output power.
Describes how stereo mode operates and its settings.
Provides specific notes for bench testing the amplifier.
Explains tandem mode where inputs are linked for multiple channels.
Details how to use bridge mono mode for higher power output.
Explains the benefits and characteristics of bridged mono mode.
Provides a step-by-step guide to setting the MLS switch.
Explains the technical background of MLS technology.
Describes issues with conventional amplifiers at low impedances.
Presents the Constant Power Converter as the solution.
Instructions on rack mounting the amplifier.
Details the cooling system and airflow requirements.
Specifies operating voltage requirements and connection.
National deviation for Denmark regarding fuses and connectors.
Explains grounding procedures and safety.
Details how to determine power and current consumption.
Shows examples of calculating heat power and efficiency.
Describes how to connect input signals to the amplifier.
Details the wiring for balanced XLR input connectors.
Explains how to connect unbalanced input signals.
Lists important precautions before operating the amplifier.
Describes the amplifier's soft-start sequence upon power-up.
Explains the function of the front panel input attenuators.
Explains the clip limiter's function to prevent speaker damage.
Details the thermal protection mechanism against overheating.
Describes VHF protection that mutes output for high frequencies.
Explains the amplifier's short circuit protection.
Details protection against over/under voltage of the AC mains.
Explains the DC protection mechanisms for the outputs.
Provides common faults and solutions for troubleshooting.
To Next Page
