Do you have a question about the Lab.gruppen iP450 and is the answer not in the manual?
Power Output (4 ohms) | 450 W |
---|---|
Total Harmonic Distortion (THD) | < 0.1% |
Signal-to-Noise Ratio | > 100 dB |
Input Sensitivity | 1.4 V |
Number of Channels | 2 |
Voltage Gain | 32 dB |
Cooling | Convection |
Connectors (Input) | XLR |
Damping Factor | > 200 |
Frequency Response | 20 Hz - 20 kHz |
Input Impedance | 20 kOhm |
Connectors (Output) | Speakon |
Power Supply | 100-240V |
Lists all components for the iP450.
Details components that vary based on product variant.
Explains components dependent on product variants.
Schematics for the A02H module.
Board placement diagram for the A02H module.
Schematics for the AIDHA module.
Board placement diagram for the AIDHA module.
Component list for LDP42, AIDHA - rev 03A.
Details variant specific components for AIDHA.
Explains variant dependent components for AIDHA.
Schematics for the MR05 module.
Board placement diagram for the MR05 module.
Component list for MR05 - rev 02A.
Details variant specific components for MR05.
Explains variant dependent components for MR05.