Product Service 1-800-522-7658
Chapter 1:
Introduction
Congratulations on your purchase of a Labconco CentriVap Cold Trap. Models
are available for operation on 115V or 230V. The CentriVap Cold Trap protects
the vacuum pump by trapping moisture, vapors and corrosive fumes as they
evaporate from the samples. The stainless steel trap is used for aqueous and
organic applications. For corrosive applications, the optional Glass Trap insert
should be used. The 230V 50Hz models comply with CE regulations.
Safety Symbols
Your CentriVap Cold Trap was designed with safety in mind, however conditions
may exist that could be hazardous.
Throughout this manual potentially hazardous conditions are identified using the
following words and symbols.
To Next Page
Loading...
