To Next PageTo Next Page
Need help?Do you have a question about the Labconco FreeZone 12 and is the answer not in the manual?
General| Capacity | 12 L |
|---|---|
| Collector Temperature | -50 °C |
| Warranty | 2 years |
| Electrical Requirements | 115V, 60Hz |
| Voltage | 115V |
Specifies dedicated outlets, voltage, and amperage for the freeze dryer.
Details site preparation for adequate airflow and stable construction.
Outlines required vacuum pump displacement and blank off pressure.
Procedures for safely unpacking and checking the freeze dryer for transit damage.
Guides through the physical installation and connection of the freeze dryer.
Step-by-step guide to connect the vacuum pump to the unit.
Instructions for plugging the freeze dryer into a power source.
Warns about flammability and hazardous material handling during use.
Explains the function of each button, switch, and indicator on the control panel.
A step-by-step guide to prepare the unit before each freeze drying run.
Details the procedures for starting and running the freeze dryer.
Provides a procedure for connecting and preparing samples.
Steps to diagnose and resolve vacuum pump performance problems.
