Labconco Protector Echo 180 Series - User Manual

Original instructions
Protector
®
Echo™ &
Protector
®
Airo™
Filtered Fume Hoods
Models
180 Series – 4', 5', 6' and 8' (Echo)
181 Series – 4', 5', 6' and 8' with side glass (Echo)
182 Series – 4', 5', 6' and 8' with 360 degree visibility (Echo)
183 Series – 4', 5', 6' and 8' Floor-Mount only (Echo)
184 Series – 3' and 4' small height models only (Airo)

Labconco Protector Echo 180 Series Specifications

General

Brand	Labconco
Model	Protector Echo 180 Series
Category	Laboratory Equipment
Language	English

Summary

Warranty

Returned or Damaged Goods

Contacting Labconco Corporation

CHAPTER 1 INTRODUCTION

CHAPTER 2 PREREQUISITES

Electrical Requirements

Details electrical power and connection requirements.

CHAPTER 3 GETTING STARTED

Installing the Hood on a Supporting Structure and Work Surface

Guides on properly mounting the hood.

Connecting the Electrical Supply Source to the Protector Hood

Details electrical connection steps for the hood.

Commissioning the Filtration Technology

Steps for setting up and verifying the filtration system.

CHAPTER 4 PERFORMANCE FEATURES AND SAFETY PRECAUTIONS

Performance Features

Describes the key capabilities and design of the fume hood.

Safety Precautions

Essential safety guidelines for operating the fume hood.

CHAPTER 5 USING THE PROTECTOR FILTERED HOOD

Working in Your Protector Filtered Fume Hood

CHAPTER 6 MAINTAINING THE PROTECTOR FILTERED HOOD

Routine Maintenance Schedule

Partial Filter Replacement Procedure

Fan Box Replacement

CHAPTER 7 ACCESSORIZING THE PROTECTOR FILTERED HOOD

CHAPTER 8 TROUBLESHOOTING

Troubleshooting

Table of common problems and solutions.

APPENDIX H CHEMICAL GUIDE

CHEMICAL GUIDE

APPENDIX J SETTING UP THE PROTECTOR ECHO FLOOR-MOUNTED FILTERED HOOD