Labconco Protector Echo 180 Series User Manual

Product Service 1-800-522-7658
105
Original instructions
CHAPTER 7
ACCESSORIZING THE
PROTECTOR FILTERED HOOD
There are several ways to accessorize and/or modify the Protector Filtered Hood
for your individual requirements. These include the addition of replacement
Neutrodine carbon filters, HEPA filters, work surfaces, base stands, base stand
shelves, seismic supports, storage cabinets, service fixtures, electrical duplex
outlets, airflow monitors, sash stops, distillation grids, remote monitoring
software, BACnet hardware, ADA remote control, extra user maintenance and
administrator cards, and sash reduction wing kits.
Filters
The Protector Filtered Hood operates with one comprehensive Neutrodine carbon
filter to adsorb solvents, acids, bases, ammonia, and formaldehyde.
Catalog #
Description
9577400
Neutrodine molecular carbon filter (universal)
9577401
Optional HEPA filter
9577402
Prefilter, located in Light Box
The Protector Filtered Hood model sizes, filter compartments, and number of
filters are listed below for installation convenience.
Hood
Size
Filter
Compartments
Required
No. of
Neutrodine
Filters
Total
Neutrodine
Filter Weight
Optional No.
of HEPA
Filters
Total HEPA
Filter Weight
3'
1
2
50 lbs.
1
10
4'
2
4
100 lbs.
2
20
5'
3
6
150 lbs.
3
30
6'
4
8
200 lbs.
4
40
8'
5
10
250 lbs.
5
50

Labconco Protector Echo 180 Series Specifications

General

Brand	Labconco
Model	Protector Echo 180 Series
Category	Laboratory Equipment
Language	English