Product Service 1-800-522-7658
APPENDIX F
BACNET
™
BACnet Checklist
1. Find out what your physical layer device and communication protocol is.
2. Labconco uses the ETH1000. Check the physical layer device and driver with the
following spreadsheet:
3. On-site IT should also be consulted and given the above spreadsheet to be sure
that the ETH1000 can be integrated into their existing network. Also the most
current version can be found on the website which should be referenced at
http://www.iccdesigns.com/downloads/documents/general/Millennium%20Series
%20Supported%20Drivers%20List.pdf
To Next Page
Loading...
