Part Number 1071400, Rev. A, ECO N670 Page 1 of 5
LABCONCO CORPORATION 8811 Prospect Ave, Kansas City, MO 64132 (816) 333-8811
or (800) 821-5525 • (816) 363-0130 fax • labconco.com
Quick Start Installation Guide for Purifier
®
Class II Biosafety
Cabinets
Preparations
Do not discard packaging until you have identified all parts that were shipped, and the
products operate properly.
Safety Precautions
The following safety precautions must be followed by all personnel unpacking the
equipment.
Wear safety glasses
Wear gloves
No loose fitting clothes
Wear close-toed shoes
The packaging allows for lifting with a mechanical lift truck or hand truck. If you
must lift the equipment manually, use at least two (2) persons and follow safe
lifting guidelines.
Packaging
Unit ships on a skid – weight varies 510 lbs. to 1075 lbs.
A telescoping base stand may be included, if purchased as a package.
Requirements
Tools & Equipment
Pliers or flathead screwdriver
#2 Phillips screwdriver
(2) ½" adjustable wrenches
Level
Hydraulic lift table (or similar) capable of lifting up to 900 lbs.
Labor
2 people
To Next Page
Need help?
General
