Appendix A: Protector Filtered Hood Components
Product Service 1-800-522-7658
115V Duplex Receptacle, Left 10' - 12' (Gray)
115V Duplex Receptacle, Left 16' (Gray)
115V GFCI Duplex Receptacle, Left 10' - 12' (Gray)
115V GFCI Duplex Receptacle, Left 16' (Gray)
Side Panel, with window – Left
Side Panel, with window – Right
Screw, Machine #10-24 x .50 Phillips
Side Panel, Floor Mount Lower Base, 37.7", 43.7" or 55.7"
Pulley, Rear, 2" Dia. Nylon
Cable, Sash 130" – NOT SHOWN
Cable Replacement Kit, Echo
Weight Support Bracket Kit (not available for 360° visibility)
Plastic Pulley, (Front 2")
Bumper, Rubber – NOT SHOWN (lower sash bumper)
Bronze Bearing, Flanged Front, .375 OD x .281 ID – NOT SHOWN
Clamp, Cable Replacement – NOT SHOWN
Threaded Connector – NOT SHOWN (to attach weight to cable)
Wiring Harness (may be used to power optional air monitor)
Front Panel, 4', 5', 6', 8'
Rear Panel, 360° visibility only 4', 5', 6', 8'
3' (M1) Complete Airo Technology Package, no filters
4' (M2) Complete Echo/Airo Technology Package, no filters
5' (M3) Complete Echo Technology Package, no filters
6' (M4) Complete Echo Technology Package, no filters
8' (M5) Complete Echo Technology Package, no filters
Neutrodine molecular carbon filter (rotate every two years)
GFH Prefilter (inside light box)
Acid Gas Sensor, Alarming (replace every two years)
Control Panel, Electronic Box with acid sensor
Gutter, Base Filter Package
Light Module, Filter Package
Replacement Light Bulb (Phillips MASTER PL-L 18W/840/4P)
Fan Module, Filter Package
Sash Sensor (retractable sash reel)
Neutrodine (by Erlab) Filtration Technology Replacement Parts
To Next Page
Loading...
Need help?
General
