Product Service 1-800-522-7658
APPENDIX J
SETTING UP THE PROTECTOR
ECHO FLOOR-MOUNTED
FILTERED HOOD
Now that the site for your floor-mounted filtered fume hood is properly prepared,
you are ready to unpack, inspect, install, and certify your unit. Read this chapter
to learn how to:
Unpack and move your floor-mounted filtered hood.
Set up the floor-mounted filtered fume hood on the floor.
Depending upon which model you are installing, you may need common
plumbing and electrical installation tools in addition to 5/16", 3/8", 7/16", and
1/2" wrenches, ratchets, sockets, a nut driver set, a flat-blade screwdriver, a
Phillips screwdriver, and a carpenter level to complete the instructions in the
chapter.
The Protector Echo Floor-Mounted Filtered Hood models
weigh between 700 to 1500 lbs. (318-675 kg). The multiple
shipping pallets allow for lifting with a mechanical lift truck or
floor jack. If you must lift the fume hood manually, follow
safe-lifting guidelines.
Les modèles filtrée protège-capot Echo monté au plancher
pèsent entre 700 à 1500 livres. (318 à 675 kg). Les multiples
palettes d'expédition permettent de levage avec un chariot
élévateur mécanique ou prise de parole. Si vous devez soulever
la hotte manuellement, suivre les directives safe-levage.
To Next Page
Loading...
Need help?
General
