Labconco Protector Echo 180 Series User Manual

Chapter 6: Maintaining the Protector Filtered Hood
Product Service 1-800-522-7658
87
Original instructions
Step 18 – Install your new filters
Move your ladder back to the left and place your new filters on top of the fan
boxes as your new secondary filters.
Example of a M3 below
Now place the front panel or panels back on the hood that you removed earlier in
step 1.
Congratulations! You have completed the installation.
Reconfiguration Process
This procedure is used the first time a technician installs and sets up the Protector
Filtered Hood and is listed in Chapter 3. The Reconfiguration Process is also
needed to resolve a hardware mismatch 9A alarm. Additionally, many
maintenance steps that involve component replacement include the
Reconfiguration Process. Please refer to “Reconfiguration Process” in Chapter 3.

Labconco Protector Echo 180 Series Specifications

General

Brand	Labconco
Model	Protector Echo 180 Series
Category	Laboratory Equipment
Language	English