Chapter 6: Maintaining the Protector Filtered Hood
Product Service 1-800-522-7658
gGuard Checklist and Software Option
(see Appendix E for details)
The gGuard software is an optional package purchased separate. Appendix E
includes a checklist of all system requirements needed for the gGuard hood
monitoring software. It also has a list of recommendations for on-site IT to
ensure proper integration of the software onto their network.
Appendix E includes an explanation of the gGuard software with basic
troubleshooting tips for on-site IT if a communication issue arises. There is also a
step by step guide of the installation of gGuard software with screenshots.
BACnet™ Checklist Option
(see Appendix F for details)
The BACnet™ device is the ETH 1000 and can support up to 10 filtered hoods.
For example, order 2 each BACnet devices for 15 hoods. Appendix F includes a
checklist that has all requirements and supported drivers list. The list must be
checked to ensure compatibility with the BACnet that is on-site. The BACnet
option, named ETH 1000, provides BACnet capability of the filtered hood, but it
is up to the IT on-site to configure the BAS Operating Workstation (BOW)
according to its protocol with the data objects they want to see. See Appendix F
for details.
Note: BACnet is a trademark of ASHRAE.
To Next Page
Loading...
Need help?
General
