EasyManuals Logo

Labconco FreeZone 12 User Manual

Default Icon
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
34
Product Service: Domestic 1-800-522-7658, International 816-333-8811
Chapter 5: Maintaining Your Freeze Dryer
Monthly:
1. The rubber components on the Freeze Dryer may
eventually deteriorate and require replacement. The
effective life of rubber parts depends upon both
their usage and the surrounding environment.
Check all rubber hoses and gaskets and replace any
that show signs of hardening, permanent set or
deterioration.
2. Using a soft cloth, sponge or chamois and a mild,
non-abrasive soap or detergent, clean the acrylic
chamber lid.
3. Using a soft cloth, sponge, or chamois and a mild,
non-abrasive soap or detergent, clean the exterior
surfaces of the unit. Liquid spray cleaners and
polishes may be used on the exterior surfaces. Do
not use solvents to remove stains from the exterior
surfaces as they may damage the finish.
Annually:
1. Every 12 months, or more often if the Freeze Dryer
is operated in a dusty environment, the refrigeration
system condenser should be cleaned. Using a
vacuum cleaner with brush attachment, clean the
condenser to ensure proper airflow for peak
performance.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Labconco FreeZone 12 and is the answer not in the manual?

Labconco FreeZone 12 Specifications

General IconGeneral
BrandLabconco
ModelFreeZone 12
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals