Product Service 1-800-522-7658
Chapter 2:
Prerequisites
Before you install your CentriVap Cold Trap, you need to prepare your site for
installation. You must be certain that the area is level and of solid construction.
In addition, a means to exhaust the vacuum pump must be provided. An electrical
source must be located near the installation site.
Carefully read this chapter to learn:
The electrical supply requirements.
The exhaust requirements.
The vacuum pump requirements.
Refer to Appendix C: CentriVap Cold Trap Specifications for complete electrical
and environmental conditions, specifications and requirements.
To Next Page
Loading...
Need help?
General
