Chapter 5: Using The Ductless Enclosure
Product Service 1-800-522-7658
27
The Paramount Touchpad
The touchpad of the Paramount Ductless Enclosure is shown below. Take a
moment to get familiar with the buttons, their location and function. Also
familiarize yourself with the display located on the front. The display will
report system functions, such as filter types, filter life, timer displays, filter
status, and low airflow alarm messages.
Menu Button – This button toggles the display between menu modes. When
in the menu mode, this button returns you to the previous menu.
Filter Button – Automatically goes to the filter setup menu, which allows
you to display and change the programmable filter parameters such as filter
type, filter location, filter check time, and filter final time.
Mute Button
– Allows you to temporarily mute an alarm for 5 minutes.
Select Up/Down Yes/No Buttons – Allows you to change options and
values in the menu mode.
Enter Button
– Allows you to enter or select a value or select an option in
menu mode.
Timer Button
– Allows you to select either a repeating interval timer or an
elapsed timer.
Blower Button
– Starts or stops the enclosure blower. When the blower
button is activated, the inflow face velocity will register a face velocity.
Light Button
– Turns the fluorescent light on or off.
To Next Page
Loading...
Need help?
General
