Chapter 7: Accessorizing the Ductless Enclosure
Product Service 1-800-522-7658
51
2. Work Surfaces
An optional work surface is available to attach to the ductless enclosure. The
black epoxy work surfaces are contoured to fit the dimensions of the ductless
enclosures to contain spills. The stainless work surfaces include a front
trough to contain spills. See Figure 3-1 for installation.
Catalog # Description Dimensions (W x D x H)
3909900 Black, 2' W x 29", Epoxy 24" x 29" x 1"
3909901 Black, 3' W x 29", Epoxy 36" x 29" x 1"
3909902 Black, 4' W x 29", Epoxy 48" x 29" x 1"
3909906 Black, 4' W x 35.5" Epoxy 48" x 35.5" x 1"
3975504 4' (Deep) Stainless w/Trough 48" x 35.5" x 0.8"
3909907 Black, 5' W x 29" Epoxy 60" x 29" x 1"
3909908 Black, 5' W x 35.5" Epoxy 60" x 35.5" x 1"
3975502 5' Stainless w/ Trough 60 x 29" x 0.8"
3975503 5' (Deep) Stainless w/ Trough 60" x 35.5" x 0.8"
3909910 Black, 6' W x 29" Epoxy 72" x 29" x 1"
3909911 Black, 6' W x 35.5" Epoxy 72” x 35.5" x 1"
3975602 6' Stainless w/ Trough 72" x 29" x 0.8"
3975603 6' (Deep) Stainless w/ Trough 72" x 35.5" x 0.8"
To Next Page
Loading...
Need help?
General
