7) MAINTENANCE
The maintenance plan must be observed to ensure the life and proper operation of the automatic door.
It is recommended to take a maintenance contract that providing for periodic intervention on the system by
specialised technicians.
Each maintenance operation is recorded into the maintenance register.
The final user must limit himself to cleaning the glass surfaces, the fixture profiles and if necessary the
motion and presence sensors, taking care to lock the door while performing these operations.
8) DISPOSAL
At the end of its life, this system must be disposed of in accordance with national provisions.
To this purpose we recommend that you contact specialised operators.
WARNING!
While uninstalling the operators with incorporated spring lock the spring using the special screw before
removing the arm; the spring pre-tensioning may result in an danger!
Service centre
15
If the user has the program selector N-DSEL, will be advised of the
need for maintenance when the display shows the message
"SCHEDULED MAINTENANCE".
In this case, contact the authorized service center.
To Next Page
Loading...
Need help?
General
