LaCie Brick - Connect the Firewire Cable to the Drive and to Your Computer

LaCie Brick Hi-Speed FireWire &
USB 2.0 Hard Drive User’s Manual
Step 2.1 –
Connect the FireWire Cable to Your LaCie Drive and to Your Computer.
Examine the cable carefully and make sure that you have the FireWire cable properly aligned, then
insert the cable firmly into the FireWire port on the back of the drive for a stable connection.
Look for a FireWire logo (which generally is used to identify the port) next to the connector on the
front or back of your computer, then insert the cable firmly into the FireWire port for a stable
connnection.
Important Note: iLink Users!
You will need to use the USB Power Sharing Cable to provide the necessary power to
operate your drive. Move to section 2.3 Connecting the Optional Power Sharing Cable
for detailed instructions.
Tech Note: Please refer section 4.1 Advice for Optimizing FireWire Connections for important information on
disconnecting FireWire devices and ensuring optimum performance.
Important Note: Windows Users: It may take a few seconds for your computer to recognize the drive and assign it a
letter.
Mac Users: It may take a few seconds for the drive to appear on your desktop.
2. Getting Connected
page 11
1
2
FireWire/IEEE 1394 Users
1
2
Mac OS 9.x
Mac OS 10.x
FireWire
logo