laerdal LCSU 4 User Guide

3 LCSU 4 Setup
English
7
Assemble 300 ml Version
1 Push the upper port connection into the Vacuum Inlet and check that the lower part of the Canister clicks in place.
2 Connect the Patient Port onto Patient Tube
3 Connect the Patient Port onto the Canister. Ensure that all connections are secure to prevent leakage.
1 2 3
300ml
250ml
200ml
150ml
100ml
50 ml
300ml
250ml
200ml
150ml
100ml
50 ml
Notes
• The 300 ml Canister is sealed, with an internal Filter. The Canister is disposable and cannot be cleaned. The Filter automatically
stops suction/flow when the Canister is full, or the Filter becomes saturated if the unit tips onto its side during use.
• The 300 ml Canister (Cat. No. 886100) can also be used with the previous model LCSU 3. However, the LCSU 4 cannot be used
with LCSU 3 Canisters.
• To improve the upright stability, a Wire Stand (Cat. No 886115) is offered as an Optional Accessory. This adds both a handle
and a foot to the unit.

laerdal LCSU 4 Specifications

General

Brand	laerdal
Model	LCSU 4
Category	Medical Equipment
Language	English