laerdal SimJunior - SimJunior Specifications; Physical and Power Specifications; Operating Environment and Requirements; Cleaning Fluids and IV Fluid Usage

26
Specifications
Overall Dimensions
Length / Width (manikin only): 48 in x 9.84 in (120 cm x 42.5 cm)
Weight (manikin only): 25 lbs (11.36 kg)
Manikin Power
External power: Input voltage 9VDC, 1.5A
Internal battery: 7.4V, 4.4Ah, Lithium-Ion
Only use approved
SimJunior external power supply and batteries.
Air Pressure
Internal air tank: Max 6 psi
External air connection: Max 16 psi
Temperature Limits
Operating temperatures: +4 ºC to 40 ºC (39 ºF to 104 ºF)
Storage temperatures: -15 ºC to 50 ºC (5 ºF to 122 ºF)
Environment - Manikin only
Relative humidity: 20% -90% (non-condensing)
DO NOT use outdoors in wet conditions.
Not tested with salt spray.
RF Communication
Operation range: 10 m (30 ft) max.
Material Chart for Manikin
Clothes: Cotton, Nylon
Skins and airways: PVC
External hard plastics: PVC, ABS
Inner plastics: Silicone, TPU, PVC, Nitrile
ABS, POM, Nylon + GF
Epoxy-Polyurethane
Metal components: Aluminum, Brass, Steel
Caution Latex: This product contains Natural Rubber latex, which
may cause allergic reactions when in contact with humans.
Minimum Computer Requirements
• Core 2 Duo or better
• 1 GB RAM (2 GB recommended)
• 1GB hard disk space,
• 1024x768, 1280x800, 1280x1024 or better
• 16bit color resolution or better
• 100% DPI required
• Optical drive required for installation
Minimum Software Requirements
• Windows XP or Windows 7
• DotNet 3.5.1
Cleaning Fluids
To clean the manikin use one of the following:
– 60% Isopropanol alcohol
– 70% Ethanol
– Mild solution of liquid soap and water
IV Fluids
Only use distilled or deionized water to simulate IV and IO
fluids.