24
4. DIFFERENT COUNTRY MODE SELECTING
4.1 In the normal mode
The “F” button should be pressed during the radio is switched on. The display would display
blinking the last country mode.
With the or button, the country mode would be selected.
When the right country mode is selected, the
[F]
should be pressed again and as confirmation
the displayed country mode would stop blinking. After switching the radio off and on again the
new country mode would be enabled.
There are 7 different county modes (frequency bands):
Country frequency bands configuration
EU 40CH AM/FM 4W 26,965-27,405 MHz
EC 40CH FM 4W 26,965-27,405 MHz
d
40CH AM 4W 26,965-27,405 MHz
80CH FM 4W 26,565-27,405 MHz
PL 40CH AM/FM 4W 26,960-27,400 MHz
U*
40CH FM 4W 26,965-27,405 MHz
40CH AM 4W 27,60125-27,99125 MHz
IN 27CH AM/FM 4W 26,965-27,275 MHz
IS 34CH AM/FM 4W 26,965 -27,255MHz - 26,875-26,955 MHz
*Note:
In U configuration, press AM/FM to alternate between the two frequency bands (FM or AM is
displayed).
4.2 Frequency Display
On standby, press [F] button to display the frequency
of the channel selected.
To Next Page
Loading...
