LAFOMED LFSS23AA - Maintenance; Maintenance Schedule and Checks

17
Below parts must be checked or replaced regularly:
✓ Germ filter: See 8.5
✓ Seal ring: See 8.7 and 8.8.
✓ Safety valve: See8.9
Check schedule:
8.1 Door Tightness Adjustment
Door Adjustment
Push down the lever and rotate the door to adjust tightness. As shown in below picture, anticlockwise turning will tighten
the door, i.e., the door will be closer to the chamber. Clockwise turning the door will loosen it.
Detailed steps:
1） Push down the lever a little
2） Rotate the door to a specific angle
3） Release the lever
Item Checked by Cycle Maintenance
Door Professional engineer 2 years See 8.1
Seal ring User 1 year See 8.5
Printer papers User When then printer has no paper See 8.2
Fuse Professional engineer When the fuse is damaged See 8.6
Safety valve Professional engineer 1 year See 8.9