Step Sixteen: Align the bolt hole on the movable supporting brace on the foot
peddle bar with the bolt hole on the octagon foot peddle.
Step Seventeen: Secure the movable supporting brace on the foot pedal bar
with the octagon foot pedal using(2) 3/8”*46mm hex bolts. Make sure the bolt
head is on the inside of the octagon handle. Adjust the tightness of this bolt
accordingly. If this bolt is too tight, the Octagon foot pedal will not work
smoothly. When too loose it will not pick up the Octagon drum.
To Next Page
Loading...
