laguna TOOLS IQ PRO - Page 40

40
• Manually jog the spindle into a safe location by the tool rack.
MULTIPLE TOOL PROGRAM (Cont’d.)-Setting Tool Offsets
For the “Z” Axis Press
the Z+ or Z- Buttons on
the HHC.
For the “X” Axis Press
the X+ or X- Buttons
on the HHC.
For the “Y” Axis Press
the Y+ or Y- Buttons
on the HHC.
Z+/- Axis
X+/- Axis
Y+/- Axis
• The machine will
return to the starting
position after changing
tools.