Lainox COMPACT CEV Series - 11.3 - PERSONALIZATION OF COOKING CYCLES

 
During cooking cycles, the parameters
displayed are given in real time: when
the symbols or corresponding values are
pressed, the set values are shown.
      
“modify the recipe” button (the button will
turn green).
Press on the number of the cycle that is to be
personalised in order to access parameters
change relative to
- Temperature,
- Time/Core temperature,
- Fast Dry/Autoclima,
- Fan speed,
         
touch screen and turning the Scroller+ to the
desired value, then confirming the selection
by pressing the Scroller+.
 Press the “Cycles” key and turn the
Scroller+ to move between the various
program cycles, confirming by pressing
the Scroller+ to personalize the
parameters for the relative cycle.
NOTE: If you move onto a subsequent
cycle without applying any changes, after
10 seconds the display shows the current
cycle.
         
the previous display.
 At the end of each working cycle, an
end of cooking message appears on the
display.
        
Scroller+.
11  INTERACTIVE COOKING
11.3 - PERSONALIZATION OF COOKING CYCLES
CYCLES
FAS
T DR
Y
90027560rev00
01/02
FFF
AST AST AST DDD
FFF
FFF
RRR
YYY
RRR
RRR
CYCLES
10’
130°
SET
170°
%
60
Crepes-flan
First cour..
01/09/11
15.35
Before loading
preheat oven
02/02
FFF
AST AST AST DDD
FFF
FFF
RRR
YYY
RRR
RRR
CYCLES
07’
180°
SET
180°
%
20
Crepes-flan
First cour..
01/09/11
15.35
02/02
FFF
AST AST AST DDD
FFF
FFF
RRR
YYY
RRR
RRR
CYCLES
00’
180°
SET
180°
%
20
Crepes-flan
First Courses
01/09/11
15.35
Cooking ended
OKOK