30
12 EXTRA
touch screen or turn the Scroller+ to the desired
regeneration position and confirm by pressing
the Scroller+.
Based on the cooking mode selected, the oven
automatically proposes parameters which can
be personalised to suit individual needs.
BROWNING
Personalize the degree of browning by selecting
the “Temperature” symbol or the value itself
on the touch screen, turning the Scroller+ to
the desired value, then confirm by pressing the
Scroller+.
DEGREE OF COOKING
Personalize the Time/Core probe by selecting
the “Time”/”Core probe” symbol or the value
itself on the touch screen, turning the Scroller+
to the desired value, then confirm by pressing
the Scroller+.
LEVEL OF HUMIDITY
Personalize the level of humidity by selecting
the “Autoclima” symbol or the value itself on
the touch screen, turning the Scroller+ to the
desired value, then confirm by pressing the
Scroller+.
“Preheat” key (see chapter “Preheating the oven
chamber “) or, if the oven is already preheated,
key.
12.2 REGENERATION
?
On dish
On dish - ml
On dish-probe
On baking tin
On baking tin - ml
On baking tin-probe
Banqueting
Banqueting - probe
Steam regeneration
Steam regeneration-probe
Regeneration
EXTRA
Restore
original
Salve
setting
Temperature
Degree of
Cooking
04’
115°
Degree
of humidity
30%
Modify the recipe
CYCLES
On dish
Regeneration
Mode
1
2
115°
115°
03’
04’
50%
30%
EXTRA
90027560rev00