During cooking cycles, the parameters
displayed are given in real time: when
the symbols or corresponding values are
pressed, the set values are shown.
“modify the recipe” button (the button will
turn green).
Press on the number of the cycle that is to be
personalised in order to access parameters
change relative to
- Temperature,
- Time/Core temperature,
- Fast Dry/Autoclima,
- Fan speed,
touch screen and turning the Scroller+ to the
desired value, then confirming the selection
by pressing the Scroller+.
Press the “Cycles” key and turn the
Scroller+ to move between the various
program cycles, confirming by pressing
the Scroller+ to personalize the
parameters for the relative cycle.
NOTE: If you move onto a subsequent
cycle without applying any changes, after
10 seconds the display shows the current
cycle.
previous display.
At the end of each working cycle, an
end of cooking message appears on the
display.
Scroller+.
12•EXTRA
12.5.2 - PERSONALIZATION OF COOKING CYCLES
CYCLES
T DR
01/01
CYCLES
40’
54°
SET
54°
%
--
01/09/11
15.35
Fillet/Thinly sliced meat
Meats
Before loading
preheat oven
01/01
CYCLES
40’
54°
SET
54°
%
--
01/09/11
15.35
Fillet/Thinly sliced meat
Meats
Before loading
preheat oven
01/01
CYCLES
40’
54°
SET
54°
%
--
Prima di caricare
preriscaldare il forno
01/09/11
15.35
Fillet/Thinly sliced meat
Meats
Cooking ended
OKOK
90027560rev00