17
3.5 PROTECTION OF DANGEROUS AREAS OF THE MACHINE
The internal components of the machine are protected by external, upper and lower panels
that limit access to moving parts. These panels can be removed for assembly and
maintenance operations. They are fixed using screws.
The drawings below highlight the points to be considered as dangerous during the
installation phase and that attention should be paid to.
V
Internal mechanical parts
ABCDE F
External part of the machine
A: Incoming table area (optional) B: Pre-washing module
C: Washing module D: Double Re-rinsing module
E: Drying module and switchboard F: Outgoing table area (optional)
To Next Page
Loading...
