Why is my Lamona Hob making a clicking sound?
The slight clicking sound your Lamona Hob is making is normal. It's caused by the distribution of power between two heating zones on the same side of the hob.
What does FC error mean on Lamona Hob?
The FC error on your Lamona hob indicates a software key error. Turn the power off and on to reset the system. After the reset, the hob should function correctly.
Why does my Lamona LAM1761 Hob keep turning off?
If your Lamona Hob is turning itself off, it may be because the main on/off switch has been accidentally touched or covered. Try removing any objects on the hob and then turn it back on.
Why do my pans make noise on my Lamona LAM1761?
The noise your pans make during cooking on your Lamona Hob is due to vibration caused by the energy transfer from the hob to the pan. This is normal for some types of saucepans when using a high setting and will not damage the hob.
How to get rid of the smell from my new Lamona LAM1761 Hob?
It's normal for a new Lamona Hob to produce a smell during the first few uses. To minimize this, heat a pan full of water on each zone for about half an hour.
What does F8 error mean on Lamona LAM1761 Hob?
The F8 error on your Lamona hob indicates an Induction Ntc Error. Turn the power off and on to reset the system. After the reset, the hob should function correctly.
What does F2 error mean on Lamona LAM1761 Hob?
The F2 error on your Lamona hob indicates an Induction Heater Ntc Error Open. Turn the power off and on to reset the system. After the reset, the hob should function correctly.
What does F7 error mean on Lamona LAM1761?
The F7 error on your Lamona hob indicates an Induction Ntc Error. Turn the power off and on to reset the system. After the reset, the hob should function correctly.
What does Ft error mean on Lamona LAM1761 Hob?
The Ft error on your Lamona hob indicates a Touch Ntc Error. Turn the power off and on to reset the system. After the reset, the hob should function correctly.
What does FA error mean on Lamona LAM1761 Hob?
The FA error on your Lamona hob indicates a software key error. Turn the power off and on to reset the system. After the reset, the hob should function correctly.
Covers warnings about hot surfaces, child supervision, and object placement on the hob.
Advice on preventing and handling kitchen fires, including pan fires and deep-fat frying.
Instructions to prevent damage to the hob from impacts, spills, and improper use.
Explanation of the touch control panel, its layout, and basic operation.
Details on switching zones, power boost, quick operation, pan detection, and lock.
Guidance on suitable cookware, auto power tuning, overheat protection, and residual heat.
Information on the automatic shut-off feature for extended periods of inactivity.
Procedures and recommendations for cleaning and maintaining the ceramic glass surface.
Essential safety precautions to follow when cleaning the hob.
Guidance on identifying and resolving common problems encountered with the hob.
A list of error codes, their descriptions, and recommended actions.
Important safety and general advice for qualified installers.
Requirements for hob placement, ventilation, and distances from other units.
Instructions for cutting the worktop, protecting edges, and sealing the hob.
Detailed steps for safely connecting the hob to the main electricity supply.
Information on the manufacturer's guarantee coverage and terms.
Steps to follow and information required when reporting a fault or issue.
To Next Page
General
