This device is controlled with a touch control panel.
Each operation you make on your touch control
panel will be confirmed by an audible signal.
Always keep the control panel clean and dry.
Having damp and soiled surface may cause
problems in the functions.
Turning on the hob
1. Touch key on the control panel. The key
turns on. The hob is ready for use. If no operation is
performed within 20 seconds, the hob will
automatically return to Standby mode.
When any key ( key) is pressed for a long time,
the product automatically turns off for safety
reasons.
Turning off the hob
1. Touch key on the control panel.
The hob will turn off and return to Standby mode.
H or h symbols that appear on the cooking zone
display after the hob is turned off indicates that the
cooking zone is still hot. Do not touch cooking zones.
Controls layout
Turning on the hob
NOTE: DO NOT PLACE HOT PANS ON CONTROL
PAD AREA
* Always keep the control panel clean and dry.
Damp or soiled surface may cause error codes
to be displayed or functions to be effected.
* If the control panel is exposed to intense
vapour or liquid this may also cause error codes
to be displayed or functions to be effected.
Using the hob
Do not use the hob if the glass surface is cracked, as electrical parts are directly beneath.
Switch off the appliance at the supply to prevent electric shock and contact your supplier.
The appliance is not intended to be operated by means of an external timer or separate control
system.
The hob surface remains hot after use. DO NOT TOUCH.
Cooking Zone Display
Cooking Zone
Selection Control
Power / Timer Set
Keylock Child Lock
Main Key - On/0ff
Timer Selection
Stop / Cleaning Lock / Unlock
Adjustment Area
for Temperature
Automatic Cooking Functions
Quick Heating / Booster
0
A
0
A
09
User manual LAM1850
To Next Page
Loading...
