Need help?Do you have a question about the Lampert M280 and is the answer not in the manual?
General| Welding Current (TIG) | 5-280 A |
|---|---|
| Output Current Range | 5-280 A |
| Welding Method | TIG, Plasma |
| Power Supply | 3-phase 400V |
| Duty Cycle | 60 % |
General safety guidelines and precautions for operating the welding device.
Protective gloves, skin protection, and dry clothing are required to prevent burns.
Using certified protective glass and masks to prevent eye damage from arc radiation.
Ensure adequate ventilation or use an extractor fan for welding fumes and gases.
Prohibition of welding on containers previously used for flammable substances.
Instructions for placing the device on a suitable, non-combustible surface for cooling.
Overview and explanation of the buttons and display on the front panel.
Description of the main menu structure and user levels for device configuration.
Function to check gas flow and eye protection filter by opening the gas valve.
Activating or deactivating the optional absorber using the power buttons.
Enabling or disabling the acoustic signal for weld triggering.
Switching the system language between German and English.
Basic information on welding power and time effects, and parameter setting guidelines.
Step-by-step guide to setting welding parameters using the device controls.
Explanation of symbols representing different welding situations and their optimal settings.
Step-by-step guide for initiating and executing the welding process.
Instructions for connecting and using the optional foot switch for welding control.
Essential tips and best practices for achieving optimal welding results.
Maintenance guidelines for ensuring the long-term functionality of the welding device.
Detailed technical specifications and operating parameters of the welding device.
Explanation of pictographs and symbols found on the device's type plate.
Troubleshooting guide for common faults and their remedies for the welding device.
To Next Page
