LANCERTECH LT-510 - Setting Menu Options; Recording and Image Settings; Audio, Display, and System Settings; Advanced System Configuration

5
Setting Menu
(★)is factory default value. All settings to return to the factory default settings
Please reset it to the factory default value.
※Note①:【ON】means the rear camera will be a mirror image.
※Note②:【OFF】means the screen display is always on.
※Note③:【OFF】means the emergency recording can not be used automatically.
※Note④:【ON】means the drive recorder will beep when it can not record.
※Note⑤:【OFF】means you can not start / stop recording in conjunction with the
engine.
※Note⑥:You need to set the date regularly.
Recording Resolution
1920×1080(★)；1280×720
Static Image Resolution
1M/2M/5M(★)/8M
Loop Recording
1 min (★) / 3 mins / 5 mins / 10 mins ※ 1 min
recommended
Microphone Volume
High (★) / Medium / Low / Off
Speaker Volume
High (
★
) / Medium / Low / Off
Language
Simplified Chinese, Traditional Chinese, English (★),
Japanese, Indonesian, Vietnamese, Spanish
Frequency
Automatic / 50HZ / 60HZ (★)
Rear camera Mirror
On (★) / Off ※ Note①
Screen Saver
1 min / 3 mins / 5 mins / off (★) ※Note②
Power off Delay
3 seconds (★)/5 seconds/10 seconds
G Sensor Sensitivity
Off / Low / Medium (
★
) / High ※Note
③
Warning Sound
On (
★
) / Off ※Note
④
Automatic Recording
On (
★
) / Off ※Note
⑤
Date and Time Setting
Set the system time of this machine. ※Note⑥
Memory Card Capacity
Card usage information will be displayed.
Memory Card Format
Perform card formatting.
Restore Factory Setting
Reset all setting to the factory setting.
Version
The firmware version is displayed.