Land UNO - Table of Contents

User Guide User Guide
Page 39 Page 39
Fibroptic Thermometer
Fibroptic Thermometer
Contents (i)Contents (i)
Contents
QUALITY ASSURANCE
SAFETY INFORMATION
CONTENTS (THIS LIST)
1.0 INTRODUCTION 1
1.1 About this guide 1
1.2 About the UNO Fibroptic thermometer 1
1.3 Unpacking the thermometer 2
1.4 Nomenclature 2
1.5 Specifications 4
2.0 INSTALLING THE UNO FIBROPTIC THERMOMETER 7
2.1 Positioning the Optic Head 8
2.2 Installing the lightguide 9
2.3 Positioning the Thermometer 9
3.0 USING THE THERMOMETER 11
3.1 Removing the chassis from the thermometer cover 11
3.2 Location of controls 12
3.3 Setting the Emissivity/Non Greyness value 13
3.4 Setting the Time Functions 15
3.5 Note your settings 17
3.6 Replacing the chassis into the thermometer cover 18
3.7 Electrical Connections 18
4.0 LASER ALIGNMENT UNIT 23
4.1 About the Laser Alignment Unit 23
4.2 Laser Alignment Unit Specification 23
4.3 Using the Laser Alignment Unit 25
4.4 Laser Alignment Unit maintenance 25
(Continued...)
Contents
QUALITY ASSURANCE
SAFETY INFORMATION
CONTENTS (THIS LIST)
1.0 INTRODUCTION 1
1.1 About this guide 1
1.2 About the UNO Fibroptic thermometer 1
1.3 Unpacking the thermometer 2
1.4 Nomenclature 2
1.5 Specifications 4
2.0 INSTALLING THE UNO FIBROPTIC THERMOMETER 7
2.1 Positioning the Optic Head 8
2.2 Installing the lightguide 9
2.3 Positioning the Thermometer 9
3.0 USING THE THERMOMETER 11
3.1 Removing the chassis from the thermometer cover 11
3.2 Location of controls 12
3.3 Setting the Emissivity/Non Greyness value 13
3.4 Setting the Time Functions 15
3.5 Note your settings 17
3.6 Replacing the chassis into the thermometer cover 18
3.7 Electrical Connections 18
4.0 LASER ALIGNMENT UNIT 23
4.1 About the Laser Alignment Unit 23
4.2 Laser Alignment Unit Specification 23
4.3 Using the Laser Alignment Unit 25
4.4 Laser Alignment Unit maintenance 25
(Continued...)
StockCheck.com