5
LANDMANN
Pos. Description Function
A1
A2
A3
A4
Flame regulator for:
Main burner 1, 2, 3, 4
Main burner 5 (infrared)
Side burner
Rotisserie burner (infrared)
Gas supply to the respective burner…
• Open and ignite gas (ame on)
• regulate (ame size = heat supply)
• close (ame o)
C Electric motor Drive unit for rotisserie with on/o button and power cord
L Switch for light Low-volt illumination (j) switch on/o; transformer in
cabinet d).
G1 Pressure reducer Reduce gas pressure.
G2 Operating lever Cut-o safety device with 2 settings:
3 o'clock setting: Gas is o - connect / disconnect the pressure
reducer
6 o'clock setting: Gas is on.
G3 Release button Disconnects the pressure reducer from the cylinder valve
G4 Gas cylinder with bottle valve Fuel container
G5 Gas hose with hose clip Directs gas to burner.
Function
When the cylinder valve (G2 at a 6 o'clock position) and the ame regulator (A) are open the gas ows through the gas hose
(G5) and the adjusting element into the burner. A battery-powered igniter produces sparks on the burners, which light the
gas. The heat can then be controlled by using the ame regulator (A). If the gas supply is closed via a ame regulator (A),
the ame is extinguished.