Lanner NCA-5710 - Page 109

Chapter 3: Software Setup
109
Feature
Options
Description
BMC Support
Enabled
Disabled
Enable or disables interfaces to communicate with
BMC.
Wait For BMC
Enabled
Disabled
Wait For BMC response for specified time out. In
PILOTII, BMC starts at the same time when BIOS
starts during AC power ON. It takes around 30
seconds to initialize Host to BMC interfaces.
FRB-2 Timer
Enabled
Disabled
Enables or disables FRB-2 timer (POST timer).
FRB-2 Timer
timeout
3 minutes
4 minutes
5 minutes
6 minutes
Enter value Between 3 to 6 min for FRB-2 Timer
Expiration value.