Need help?Do you have a question about the Lanner HCP-72i1 and is the answer not in the manual?
General| Form Factor | 1U Rackmount |
|---|---|
| Video Ports | 1 x VGA |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Product Type | Network Appliance |
| Memory | Up to 64GB DDR4 ECC/non-ECC SODIMM |
| Storage | 2 x 2.5" SATA HDD/SSD Bays |
| Expansion Slots | 2 x PCIe x8 |
| USB Ports | 2 x USB 3.0 |
| Serial Ports | 1 x RJ45 Console |
| Dimensions (W x D x H) | 44mm x 430mm x 550mm |
Provides guidelines for ensuring general safety during operation and installation.
Details the hardware specifications of the HCP-72i1 system.
Illustrates the placement of jumpers and connectors on the motherboard.
Lists and defines the function of each connector and jumper on the board.
Details the pin configurations for various connectors and jumper settings.
Describes how to access the system's internal boards (Upper and Bottom).
Provides a step-by-step guide for installing the CPU and heat sink.
Details the procedure for installing DDR3 memory modules into the DIMM sockets.
Explains how to install an IPMI card into the dedicated OPMA socket.
Guides the user through the process of installing 2.5" SATA HDDs or SSDs.
Instructs on how to remove and install network I/O modules.
Details the procedure for replacing the system's power supply units.
Provides instructions for replacing the system's cooling fans.
Guides the installation of slide rails onto the server rack.
Details how to mount the HCP-72i1 unit onto the installed slide rails.
Provides instructions on how to enter and navigate the BIOS setup utility.
Covers CPU configuration parameters and information display.
Enables or disables Intel Virtualization Technology for multiple OS support.
Configures SATA device settings, including IDE, AHCI, or RAID modes.
Allows configuration of USB parameters like Legacy USB Support.
Allows monitoring of system hardware status, including temperatures and fan speeds.
Selects the onboard LAN for PXE boot.
Configures parameters for serial port console redirection.
Details terminal type, bits per second, and other serial port settings.
Configures IOH (I/O Hub) settings, including NTB configurations.
Configures Intel VT-d for directed I/O virtualization.
Introduces IPMI and its features for managing and monitoring computing platforms.
To Next Page
