60
www.lannerinc.com
Chipset
Use [<--] / [-->] to select [Chipset] setup screen. Under this screen, you may use [↑] [↓] to select an item you
want to configure.
Restore AC Power Loss: This option specifies what state to go to when power is re-applied after a power failure (G3
state). You may select “Power Off”, “Power On” or “Last State”. The default is “Power On”.
Onboard SATA RAID Oprom/Driver: controls whether to enable the onboard SATA Option ROM or EFI Driver.
To Next Page
Loading...
