EasyManua.ls Logo

Lanner HCP-72i1 - Mouse Mode Settings

Lanner HCP-72i1
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
88
www.lannerinc.com
Manage DNS Setting of the device
Host Settings: select Automatic” or “Manual”
Host Name: the host name is automatically displayed if you choose Automatic” for Host Setting
Domain Name Configurations
Domain Settings: select domain setting mode
Domain Name: you may have to specify the domain name if “Manual is chosen for DNS Server Settings
IPv4 Domain Name Server Configurations
DNS Server Settings: select Automatic” or “Manual
Preferred DNS Server: enter the IP address for the preferred DNS server, such as 192.168.0.100
Alternate DNS Server: enter the IP address for an alternative DNS server
IPv6 Domain Name Server Configurations
DNS Server Settings: select Automatic” or “Manual
Preferred DNS Server: enter the IP address for the preferred DNS server, such as 192.168.0.100
Alternate DNS Server: enter the IP address for an alternative DNS server
Save: Save configuration changes
Reset: Reset configurations
Mouse Mode Settings
Click on “Mouse Mode Settings” under “Configuration to access redirection console mouse mode setting options.
Set Mode to Absolute (Recommended when server OS is Windows)
Set Mode to Relative (Recommended when server OS is Linux)
Select the mode based on the operating system of the remote console.

Table of Contents

Related product manuals