59
www.lannerinc.com
Legacy OS Redirection Resolution: select “80x24” or “80x25”. The default for this case is “80x24”.
Putty KeyPad: select Function Key and Key Pad on Putty. You may select “VT100”, “LINUX”, “XTERMR6”, “SC0”, “ESCN”,
or “V1400”.
Redirection After BIOS POST: The settings specify if BootLoader is selected than Legacy console redirection is
disabled before booting to Legacy OS. Default value is “Always Enable” which means Legacy OS console redirection
is always enabled after BIOS.
To Next Page
Loading...
