Lanner NCA-5710 - Page 87

Chapter 3: Software Setup
87
PCH SATA Configuration
Feature
Options
Description
sSATA Controller
Disabled
Enabled
Enables or disables SATA Controller
Configure SATA as
AHCI
RAID
This will configure SATA as RAID or
AHCI.
Support Aggressive
Link Power
Management
Disabled
Enabled
Enables or disables SALP
Port 0
Disabled
Enabled
Enable or Disable SATA Port
Hot Plug
Disabled
Enabled
Designates this port as Hot Pluggable.
Configure as eSATA
Disabled
Enabled
Configures port as External SATA
(eSATA)
Mechanical Presence
Switch
Disabled
Enabled
Controls reporting if this port has a
Mechanical Presence Switch; requires
hardware support.
Spin Up Device
Disabled
Enabled
If enabled for any of ports Staggered
Spin Up will be performed and only the