Lantronix EDS-MD Series

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 128
filename <text>
Sets FTP remote Filename.
host <text>
Sets FTP server IP address or hostname to be
connected to.
no host
Clears FTP server IP address or hostname.
no password
Sets default Password.
password <text>
Sets the Password used to logon to FTP server.
port <number>
Sets the Port number which FTP server is listening
to.
protocol ftp
Selects FTP Protocol.
protocol ftps
Selects FTPS Protocol.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
username <text>
Sets the Username used to logon to FTP server.
write
Stores the current configuration in permanent
memory.
credentials (ssl-credentials) level commands
clrscrn
Clears the screen.
create <credential name>
Create a new credential name
delete <credential name>
Delete existing credential by name
edit <credential name>
View or edit an existing credential
exit
Exits to the ssl level.
show
Show existing credential names
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
device (device) level commands
auto show tlog
Continuously displays the internal trouble log.
clrscrn
Clears the screen.
default long name
Restores the default product long name.
default short name
Restores the default product short name.
exit
Exit to the enable level.
long name <name>
Sets the product long name, displayed in command
mode and the Web interface.
short name <name>
Sets the product short name, displayed in command
mode and the Web interface. <name> = maximum
of eight characters.
show
Show system information
show hardware information
Displays information about the hardware.
show history
Displays the last 20 commands entered during the
current CLI session.
show lines
Show line information
show memory
Displays current memory usage information.
show task state
Displays current task states.
show tlog
Displays the internal trouble log.
write
Stores the current configuration in permanent
memory.