Lantronix EDS-MD Series - Page 23

4: Configuration Using XML
EDS-MD® Wired IoT Device Gateway Command Reference 23
device firmware version Read only.
long name
serial number Read only.
short name
dhcp server state enable, disable Default: disable
start ip address Default: 192.168.0.20
end ip address Default: 192.168.0.254
lease time Default: 24 hours
static leases
(“instance” attribute is
a number)
mac address static lease instance
can be 1-8
ip address Default:
<None>
diagnostics log output Disable, Filesystem,
Line 1-4
Default: disable
max length Max size in Kbytes
allowed for log.txt
verbosity level Minimum,
Intermediate,
Everything
Default: Minimum
discovery state enable, disable Default: enable
email:instance
("Instance" attribute
is a number.)
cc
message file
priority urgent, high, normal,
low, very low
Default: normal
from
overriding domain
local port
server port
reply to
subject
to
ethernet:instance
("Instance" attribute
is “eth0”, “eth1”, or
“eth2”.)
duplex auto, half, full Default: auto
speed auto, 10, 100 Default: auto
ftp server state enable, disable Default: enable
Group Name
(continued)
Group Item Value Name Value Options Additional
Information