Lantronix EDS-MD Series - System LEDs and Reset Button; System and Serial LEDs; RJ45 Ethernet LEDs; Reset to Default Button

4: Configuration Using XML
EDS-MD® Wired IoT Device Gateway Command Reference 24
gateway wan operating mode Disabled, Gateway Default: Disabled
firewall enable, disable
wan interface eth0, eth1, eth2
router ip address
primary dns Default:
<None>
secondary dns Default:
<None>
port forwarding
(“instance” attribute is
a number)
state enable, disable
friendly name
port or range
target port
protocol Both, TCP, UDP Default: Both
ingress ip address Default:
<None>
ip address Default:
<None>
static routes
(“instance” attribute is
a number)
state enable, disable
network
gateway
metric
interface eth0, eth1, eth2
friendly name
host:instance
("Instance" attribute
is a number.)
name
protocol telnet, ssh Default: telnet
ssh username
remote address
remote port Default: 0
http authentication
uri
user delete name Deletes an HTTP
Authentication URI
user. The value
element is used to
specify the user for
deletion.
realm
type
user (instance is
“admin”)
password
Group Name
(continued)
Group Item Value Name Value Options Additional
Information