Lantronix EDS-MD Series - Page 32

4: Configuration Using XML
EDS-MD® Wired IoT Device Gateway Command Reference 32
tunnel
accept:instance
("Instance" attribute
is a number.)
accept mode disable, always Default: always
start character Accepts a control
character, for example,
<control>A
represents control-A
Default: <control>B
flush start character enable, disable Default: enable
local port Default: 0
protocol tcp, ssh, telnet, tcp
aes, ssl
Default: tcp
credentials
tcp keep alive &#60;None&#62;, ... Default: 45000
milliseconds
aes encrypt key Value is SECRET,
hidden from user view.
aes decrypt key Value is SECRET,
hidden from user view.
flush serial enable, disable Default: disable
block serial enable, disable Default: disable
block network enable, disable Default: disable
password password Value is SECRET,
hidden from user view.
prompt enable, disable Default: disable
email connect &#60;None&#62;, ... Default: <None>
email disconnect &#60;None&#62;, ... Default: <None>
Group Name
(continued)
Group Item Value Name Value Options Additional
Information