Lantronix EDS-MD Series

4: Configuration Using XML
EDS-MD® Wired IoT Device Gateway Command Reference 33
tunnel
connect:instance
("Instance" attribute
is a number.)
connect mode disable, always, any
character, start
character, modem
control asserted,
modem emulation
Default: disable
start character Accepts a control
character, for example,
<control>A
represents control-A
Default: <control>B
flush start character enable, disable Default: enable
local port &#60;Random&#62;,
...
Default: <Random>
host
("Instance" attribute is
a number)
address
port &#60;None&#62;, ... Default: <None>
protocol tcp, udp, ssh, telnet,
tcp aes, udp aes, ssl
Default: tcp
ssh username
credentials
validate certificate enable, disable Default: enable
tcp keep alive &#60;None&#62;, ... Default: 45000
milliseconds
aes encrypt key Value is SECRET,
hidden from user view.
aes decrypt key Value is SECRET,
hidden from user view.
host mode sequential,
simultaneous
Default: sequential
reconnect time Default: 15000
milliseconds
flush serial enable, disable Default: disable
block serial enable, disable Default: disable
block network enable, disable Default: disable
email connect &#60;None&#62;, ... Default: <None>
email disconnect &#60;None&#62;, ... Default: <None>
tunnel
disconnect:instance
("Instance" attribute
is a number.)
stop character Accepts a control
character, for example,
&#60;control&#62;A
represents control-A
flush stop character enable, disable Default: enable
modem control enable, disable Default: disable
timeout Default: 0 milliseconds
flush serial enable, disable Default: disable
Group Name
(continued)
Group Item Value Name Value Options Additional
Information