Lantronix EDS-MD Series

4: Configuration Using XML
EDS-MD® Wired IoT Device Gateway Command Reference 35
XML Status Record Groups and Items
Table 4-8 lists the supported XML Status Record (XSR) groups and items. These groups and
items show the status of the device in XML form and can only be exported. The XSR schema
differs slightly from the XCR groups and items in that the XSR allows groups within groups.
Note: The Valid Values column of Table 4-8 indicates the default value.
Table 4-8 XSR Group and Items
Group Name Item Name Value Name Valid Values
action:instance (“instance”
attribute is “ethN link state
change”)
alarm state off, on
duration duration in N days 00:00:00
(hh:mm:ss)
transitions
arp arp entry ip address ip address in format
nnn.nnn.nnn.nnn
mac address mac address in format
xx:xx:xx:xx:xx:xx
type dynamic or static
interface eth0 or wlan0
clock time real time clock time in format
hh:mm:ss <timezone>
date real time clock date in format
dayofweek day month year
timezone zone
offset
device product info product type Lantronix EDS-MD
serial number 12 hex digits
firmware version string in version format like
7.3.0.1R7
uptime elapsed time in format d
days hh:mm:ss
permanent config saved or unsaved
email:instance ("Instance"
attribute is "<decimal>")
success sent decimal number
sent with retries decimal number
failed decimal number
queued decimal number
email log:instance
("Instance" attribute is
"<decimal>")
entry time timestamp in format d days
hh:mm:ss
log string
failover: instance
(“instance” attribute is
eth0, eth1, eth2)
state
transitions decimal number