Lantronix EDS-MD Series - Page 618

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 618
auth type <uri> ssl-basic
Sets the authentication type for an HTTP server
authentication directive to SSL-Basic. <uri> = URI of
the server.
auth type <uri> ssl-digest
Sets the authentication type for an HTTP server
authentication directive to SSL-Digest. <uri> = URI
of the server.
authentication timeout <minutes>
For any Digest AuthType, sets the timeout for
authentication. <minutes> = authentication timeout
value.
clear counters
Sets the HTTP counters to zero.
clear log
Clears the HTTP server log.
clrscrn
Clears the screen.
default authentication timeout
Resets the authentication timeout to its default
value.
default log format
Restores the HTTP Server log format string to its
default value.
default max bytes
Resets the maximum bytes to its default value.
default max log entries
Restores the default maximum number of HTTP
Server log entries.
default max timeout
Resets the timeout to its default value.
default port
Resets the HTTP Server port to its default value.
default secure port
Resets the HTTP Server SSL port to its default
value.
default secure protocols
Restores the default secure protocol selections.
delete auth <uri>
Deletes an existing HTTP Server authentication
directive. <uri> = URI of the server.
exit
Returns to the config level.
log format <text>
Sets the log format string for the HTTP server, using
the following directives: %a remote ip address
(could be a proxy) %b bytes sent excluding headers
%B bytes sent excluding headers (0 = '-') %h
remote host (same as %a) %{h}i header contents
from request (h = header string) %m request
method %p ephemeral local port value used for
request %q query string (prepend with '?' or empty '-
') %t timestamp HH:MM:SS (same as Apache
'%(%H:%M:%S)t') %u remote user (could be bogus
for 401 status) %U URL path info %r first line of
request (same as '%m %U%q <version>') %s return
status
logging state disable
Disables HTTP server logging.
logging state enable
Enables HTTP server logging.
max bytes <number>
Sets the maximum number of bytes the HTTP
server accepts when receiving a request.
max log entries <number>
Sets the maximum number of HTTP server log
entries. <number> = maximum number of HTTP
server log entries.
max timeout <seconds>
Sets the maximum time the HTTP server waits
when receiving a request. <seconds> = maximum
timeout value.
no clear counters
Restores the HTTP counters to the aggregate
values.