Lantronix EDS-MD Series - Page 689

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 689
exit
Exits to the next higher level.
no password
Removes the password so connections will be
accepted unchallenged.
password <text>
Sets the password required on the network side of
the tunnel to begin a connection.
prompt disable
Inhibits any prompting for password on the network
side of the tunnel.
prompt enable
Sets up so a user on the network side of the tunnel
will be prompted for a password.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
password (tunnel-accept-password:13) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no password
Removes the password so connections will be
accepted unchallenged.
password <text>
Sets the password required on the network side of
the tunnel to begin a connection.
prompt disable
Inhibits any prompting for password on the network
side of the tunnel.
prompt enable
Sets up so a user on the network side of the tunnel
will be prompted for a password.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
password (tunnel-accept-password:12) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no password
Removes the password so connections will be
accepted unchallenged.
password <text>
Sets the password required on the network side of
the tunnel to begin a connection.
prompt disable
Inhibits any prompting for password on the network
side of the tunnel.
prompt enable
Sets up so a user on the network side of the tunnel
will be prompted for a password.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
password (tunnel-accept-password:11) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.