Lantronix EDS-MD Series

5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference 700
exit
Returns to the tunnel level.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
serial (tunnel-serial:15) level commands
clrscrn
Clears the screen.
default dtr
Restores default DTR control, asserted while
connected.
dtr asserted while connected
Asserts DTR whenever a connect or accept mode
tunnel connection is active.
dtr continuously asserted
Asserts DTR regardless of any connections.
dtr truport
Asserts DTR to match remote DSR when connected
via Telnet.
dtr unasserted
Does not assert DTR.
exit
Returns to the tunnel level.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
serial (tunnel-serial:14) level commands
clrscrn
Clears the screen.
default dtr
Restores default DTR control, asserted while
connected.
dtr asserted while connected
Asserts DTR whenever a connect or accept mode
tunnel connection is active.
dtr continuously asserted
Asserts DTR regardless of any connections.
dtr truport
Asserts DTR to match remote DSR when connected
via Telnet.
dtr unasserted
Does not assert DTR.
exit
Returns to the tunnel level.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
serial (tunnel-serial:13) level commands
clrscrn
Clears the screen.
default dtr
Restores default DTR control, asserted while
connected.
dtr asserted while connected
Asserts DTR whenever a connect or accept mode
tunnel connection is active.
dtr continuously asserted
Asserts DTR regardless of any connections.
dtr truport
Asserts DTR to match remote DSR when connected
via Telnet.
dtr unasserted
Does not assert DTR.